Today, the Corundum Abrasive manufacturer introduces the characteristics of grinding.
Grinding utilizes abrasive particles coated or pressed into the lap to perform finishing of the machined surface by relative movement of the lap and the workpiece under a certain pressure. Grinding can be used to process a variety of metal and non-metallic materials, the surface shape of the processing is flat, inner and outer cylindrical and conical surfaces, convex, concave spherical, thread, tooth surface and other profiles.
Abrasive material:
1. Research material:
a. Cast iron: grinding hardened and non-hardened steel and cast iron parts.
b. Brass: Grinding various soft metals.
2, abrasive:
a. Abrasive: alumina, silicon carbide, iron oxide, cerium oxide, and the like.
b. Grinding fluid: motor oil, kerosene, animal oil and oleic acid, stearic acid.
Grinding features and applications:
1. The equipment is simple and the precision is high.
2. The processing quality is reliable. High accuracy and very low Ra values are obtained. However, it is generally not possible to improve the positional accuracy between the machined surface and other surfaces.
3. Can process all kinds of steel, hardened steel, cast iron, copper and aluminum and their alloys, hard alloys, ceramics, glass and some plastic products.
4. Grinding is widely used in the processing of various high-precision profiles in single-piece small batch production, and can be used in mass production.
information about corundum abrasive: https://www.zhongyun-machine.com/product/abrasive/
Today, Ceramic Grinding Abrasive manufacturers share knowledge of polishing machines:
Polishing machine features:
The rotating speed of the guide wheel of the polishing machine is adjustable to meet the requirements of grinding and polishing of workpieces with different diameters and different speeds. Optional cooling system; equipped with dust cover, environmentally friendly and safe.
How to use the polishing machine:
First, preparation before processing
1. Connect the power and ground wires as required and turn on the power. The power supply is a three-phase 380V AC power supply. To ensure personal safety, use an automatic switch with leakage protection.
2. Add enough soluble coolant to the coolant tank (no oily coolant is allowed).
Second, empty car trial turn
1. Turn on the power. Check that the guide or polishing wheel is normal.
2. Operate the button to check if the electrical control system is working properly.
information about ceramic grinding abrasive : https://www.zhongyun-machine.com/product/abrasive/
The polishing machine is a kind of equipment that is widely used in the processing of hardware and electronic components. It has a wide range of applications and can replace manual polishing to increa...
When the workpiece is polished and polished, the materials used vary depending on the purpose of the workpiece. For example, the workpiece is made of metal or non-metal, but iron, steel, and metal are...
How to make the vibration grinding machine equipment more and more refined, then what are the technical characteristics? The following Ceramic Grinding Abrasive manufacturers will discuss it.
First, it is less affected by power supply fluctuations. The electromagnetic exciter causes a large change in the exciting force due to the voltage change, but in a vibrating motor, this change is very small.
Second, the exciting vibration force and the power are properly matched, the vibration force is large, the weight of the body is light, the volume is small, and the mechanical noise is low. Because the vibration motor is a strong resistance type vibration rather than resonance, it has a stable amplitude.
Thirdly, the direction of the exciting force can be changed according to the installation mode of the vibration motor, and the exciting force and amplitude can be adjusted steplessly by adjusting the angle of the eccentric block.
In fact, the maintenance of the vibrating mill is also very simple. Since it does not use the spring like the electromagnetic type, maintenance work such as gap adjustment and weight adjustment can be dispensed with, and only the bearing needs to be repaired regularly.
information about ceramic grinding abrasive : https://www.zhongyun-machine.com/product/abrasive/
page=3&profile_user_id=553001&year=&month=
View More