Inline Closure Manufacturer Introduces Fiber Optic Quick Connector Workflow

A fiber optic quick connector is a medium used to connect to a network for Internet access. Therefore, knowledge about how to connect fiber optic quick connectors is organized and distributed by Inline Closure manufacturers.

First, pick up the fiber optic connector, turn the tube counterclockwise, and thread the fiber into the tailpipe.

Then, the fiber was inserted into a flat fiber stripper, and an outer wall of about 65 mm was peeled off to confirm whether the fiber was damaged, and one of the unused bare fibers was broken.

Place the fiber into the slot of the fixed length stripper, close the lid and pull the fiber out, strip the bare fiber coating, and clean the bare fiber with alcohol-coated test strips.

Press the fiber into the groove of the fixed length stripper, place the fixed length stripper into the cutting sipe, cut the fiber, remove the fiber, and then remove the dust jacket.

Insert the tail clip of the fiber optic connector into the end of the fiber connector up to the anchor point, then connect the tail pipe in the direction of the tube to the connector body to secure the fiber.

The fibers of the protruding ceramic core end face are flattened by the other end of the boot. When the fiber is flattened, remove the plug and place the connector cap in the connector body.



information about Inline Closure : https://www.greentelftth.com/product/fiber-optical...