Aluminum Wheel Polishing Machine Supplier Shares The Process Of Using Car Polisher

The key to the operation of the polisher is to try to get the maximum polishing rate in order to remove the damage layer from the polishing as quickly as possible. At the same time, the polishing damage layer will not affect the final observed tissue, that is, it will not cause false tissue. What are the auto polisher accessories? Let's take a look at the suppliers of the Aluminum Wheel Polishing Machine .

The polishing machine consists of basic components such as base, throwing disc, polishing fabric, polishing cover and cover. The motor is fixed to the base, and the taper sleeve for fixing the polishing disc is connected to the motor shaft by screws. The polishing fabric is fastened to the polishing disk by a ferrule, and after the motor is turned on by the switch on the base, the sample can be manually pressed to polish on the rotating polishing disk. The polishing liquid added during the polishing process can be poured into the square plate placed beside the polishing machine through a drain pipe in a plastic tray fixed to the base. The polishing cover and cover prevent dirt and other debris from falling on the polishing fabric when the machine is not in use, which affects the use effect.

The car polishing machine is mainly used to make up for the small defects of the surface of the paint film such as coarse grain, sandpaper mark, flow mark, anti-white, orange peel, etc. after the surface of the automobile is sprayed. The treatment method is to grind and polish after spraying. In order to improve the mirror effect of the paint film, the requirements of brightness, smoothness and brilliance are achieved.


information about aluminum wheel polishing machine : https://www.zhongyun-machine.com/product/wheel-pol...